Building the Kaczor 6m Page 1 Timber arrives & the mould frames are cut out.
Mould Frames are set up on the strong back and levelled before being faired.
The laminated stem is positioned & Cedar planking begins.
The Planking is completed, the retaining screws are removed & holes filled.
A FRP fore foot is moulded over foam and fitted to the Cedar hull.
After 2 layers of UD glass & much fairing, finally 2 coats of sprayed epoxy primer.
The moulded hull is turned over and loaded up for transport to a new home.
The coach roof is moulded & 2 layers of UD glass applied.
Internal glass/epoxy in the bilge & forward frames bonded in place.
Internal framework is nearly complete.
|
